SecureData SecureDrive BT 250GB Encrypted SSD with Bluetooth Authentication

The SecureDrive BT Encrypted SSD is a software-free solid-state drive that supports a capacity of up to 250GB. This bluetooth hardware encrypted drive must be connected to a computer featuring a USB 2.0 port for use. It is accessed with user authentication via the DataLock app from any smartphone, tablet, wearable, or similar mobile device (available for download at the app store Apple/Android). The SecureDrive BT can be unlocked with a user created seven to 15-digit alpha numeric pin or Apple touch ID/face recognition. All user data, PINs, crypto parameters, and encryption keys are always encrypted while at rest.

FIPS compliant drive design including secure bluetooth

AES 256-bit XTS hardware encryption

Remote management option can be added to the drive at any time after purchase (subscription fees apply)

While your drive is added to the DataLock RM and it is lost or stolen; the data can be crypto erased remotely

The SecureDrive will work on any host operating system (Microsoft Windows, MacOS, iOS, Linux, Chrome, Thin Clients, Zero Clients, Android, and Embedded systems)

Pre-loaded one year license for the USB anti-virus by ESET real-time heuristic scanning

The USB controller will be unlocked to initiate communication between the drive and host OS when the user enters the correct PIN via the DataLock app

Hardware encryption eliminates loss in data read/write speeds, even if the hard drive is extracted from the enclosure

The data encryption process consists of 14 different rounds of encryption to make your original data unrecognizable to an unauthorized user

SecureDrive encryption for data at rest is implemented using the XTS block cipher mode since it circumvents multiple weaknesses of the older AES modes, such as CBC and ECB

USB 3.0 uses two unidirectional data paths, one to receive data and the other to transmit

The USB SuperSpeed bus provides a transfer mode at a nominal rate of 5.0 Gbit/s while being backwards compatible with USB 2.0 for older hardware

Brute force anti-hacking detection is triggered by entering an incorrect password ten consecutive times

BadUSB protection

Optional read-only mode prevents writing, deleting, saving or editing any files to the device until read/write is enabled

You can save boot files and drivers required to load a PC, laptop, or workstation on a SecureDrive and it will keep your system image fully encrypted until you're ready to load the machine

To protect against unauthorized access when the drive is connected to a host computer and unattended, the drive can be set to automatically lock after a pre-set amount of time of inactivity

The step-away auto lock will lock the drive (disappear from the File Explorer/Finder) when the iOS/Android device is moved about 9.8' away from the drive for longer than 5 seconds

Red, blue, and green LEDs

GDPR compliant solution

GSA contractor GS-35F to 288BA

Designed and assembled in the USA

MS