Nimbus WiMi6220TR Wireless 3G SDI and HDMI H.264 Encoder Decoder Set

Features

• H.264 (MPEG-4 Parts10: AVC)
• Baseline profile with level 4.2
• Low delay (40ms), end-to-end (80ms), H.264 engine
• Transport 1080p60 full HD over wireless/Ethernet
• SD/HD/3G-SDI video in/out with embedded audio
• HDMI video in/out with embedded audio
• Selection of encoding rate and Wi-Fi frequencies

What's in the Box

• Nimbus WiMi6220T/R Wireless 3G-SDI and HDMI H.264 Encoder/Decoder Set
• Limited 1-Year Warranty

Specifications

Nimbus WiMi6220T/R Wireless 3G-SDI and HDMI H.264 Encoder/Decoder Set

Characteristics

• Full HD sender
• H.264 (MPEG-4 Parts10: AVC)
• Baseline profile with level 4.2
• Low delay (40ms), end-to-end (80ms), H.264 engine
• Transport 1080p60 full HD over wireless/Ethernet
• SD/HD/3G-SDI video in/out with embedded audio
• HDMI video in/out with embedded audio
• Selection of encoding rate and Wi-Fi frequencies
• 2-way talk-back audio channel for embedded wireless audio
• 480i59.94, 576i/50, 720p60/59.94/50/30/29.97/25/24/23.98,
• 1080i60/59.94/50, 1080p60/59.94/50/30/29.97/25/24/23.98 and PsF format
• Live streaming from broadcast/DSLR camera over wireless/Internet
• Full HD live streaming server on transmitter and receiver
• RTSP streaming server (RTP/UDP)
• MPEG2TS streaming (UDP)
• Relay streaming server (RTSP/MPEG2TS) on the receiver
• Comfortable and wide coverage over wireless /Internet
• Wireless: up to 1,500m (5,000 feet) line of sight
• Wide Wi-Fi radio channel: 12 Channel 40MHz, 24 chaanel 20MHz
• Small form factor (enclosure): 144 x 91 x 26 mm
• DC input range and power: 6.8V to 16V, 11W (TX), 10W (RX)
• Save bandwidth cost with multicasting: Maximum 4 receivers in wireless multicasting

Applications

• Wireless camera
• Medical imaging
• Board solutions for OEM
• Low-cost full HD encoder
• Full HD live streaming
• RTSP/MPEG-2TS Server

Interfaces

• Video interfaces
• SD/HD/3G-SDI input and output: up to 1080p60
• HDMI input and output: up to 1080p60
• Network and control interfaces
• 10/100 BASE-TX, cat.5e UTP cable
• IEEE 802.11ac, 5 GHz (12 Channel 40MHz, 24 channel 20MHz)
• Full duplex RS-422 interface for relaying external camera control signals (CCU, PTZ)
• Ethernet over Wi-Fi for relaying Ethernet CCU/PTZ

Audio Interfaces

• Embedded audio on SDI and HDMI port
• Analog: Stereo, 48kHz 16-bit linear PCM
• Talk-back audio jack: 3mm mini stereo phone with mic

Audio Interfaces

• Embedded audio on SDI port
• Analog: Stereo, 48kHz 16-bit linear PCM
• External audio jack: Mini stereo phone
• Wireless talk-back audio jack: Mini stereo phone

Supported SDI Format

• SMPTE 244, BT601 (NTSC): 480i59.94
• IEC61179-5, BT601 (PAL): 576i50
• SMPTE 296M: 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
• SMPTE 274M: 1080i50, 1080i59.94, 1080i60,1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30,1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50, 1080p59.94, 1080p60

SDI Compliance

• SMPTE 259M: SDTV digital signal/data serial digital interface
• SMPTE 292M: 1.5Gb/s signal/data serial digital interface
• SMPTE 425M: 3Gb/s Signal/data serial digital interface
• SMPTE 299M: 16bit digital audio format for SMPTE 292M
• SMPTE 352M: Video payload identification for digital interfaces

Radio Specification

• Wi-Fi Standard: IEEE 802.11ac, FCC/CE/Japan/KC approval
• Frequency: U-NII-1(5.15 to 5.25GHz), U-NII-2A(5.25 to 5.35GHz), U-NII-2C(5.47 to 5.725GHz),
• U-NII-3(5.725 to 5.85GHz)
• Transmission distance: Up to 1,500m (5,000 feet) line of sight
• Transmission power: Maximum 66mW (18 dBm)/antenna, total: 200mW (23 dBm)
• Antenna: 3T x 3R MIMO

AQ/