Orange Amps Rockerverb 50 MKIII Tube Amp Head with Speaker and Guitar Cables

Orange Amps Rockerverb 50 MKIII Tube Amp Head with Speaker and Guitar Cables

What's in the Box

• Orange Amps Rockerverb 50 MKIII Tube Guitar Amp Head
• Pig Hog Speaker Cable, 3ft (14 Gauge Wire)
• Pig Hog Black Woven Right Angle Instrument Cable (10-Feet)

Orange Amps Rockerverb 50 MKIII Tube Guitar Amp Head

The Orange Amps Rockerverb 50 MKIII Tube Guitar Amp Head combines over a decade of user feedback with numerous improvements to the design. In a first for the Rockerverb Series, the MKIIIs include selectable output power options to manipulate headroom and volume. This 50-watt version switches down to 25W in half power mode, whilst the main transformers have also been upgraded for better low-end response and articulation. The MKIII also features the same footswitchable attenuator that has been so popular with users of our Thunderverb and Dual Dark Series amps.

Highly Versatile Twin Channel Design

The original Rockerverb gained a cult following on account of its iconic high gain tones. The MKIIIs of course continue this tradition, but these amps are immensely flexible. The Dirty channel goes anywhere from clean to crunch to the very heaviest modern saturation, and always maintains outstanding clarity. The non-master volume Clean channel has been re-engineered to take on a more ‘sparkly’ and ‘crisp’ nature but with greater control through a revoiced two-band EQ section. The MKIIIs have even greater headroom and volume in full power mode should you need it, but this can now be manipulated with the amp’s output power and Attenuator controls.

Footswitchable Valve Driven Spring Reverb

Driven by an ECC83/12AT7 valve and a custom transformer, the spring reverb circuit in the MKIII has undergone significant upgrades. Brighter and more controllable than its predecessor, this lush spring reverb circuit covers everything from ‘air’ to full-on surf.

Footswitchable Attenuator Control

Cranked amp tones at ‘conversation volumes. The Attenuator circuit is located after the master volume controls and determines when and how the amp distorts after the preamp stage. This means the overall volume level can be reduced, whilst keeping control over the entire amp’s clipping characteristics. Unlike a loadbox, the design ensures the all-important relationship between the output transformer and the speaker remains intact so, even at very low volumes, the amp remains springy and responsive. Turning the Attenuator control clockwise reduces the overall output level (i.e. increases the attenuation), which can be remotely defeated via a footswitch for a volume boost on either channel for lead lines.

Switchable Output Power

Switching the amp’s output power allows for more control over the headroom and breakup from the output valves. Reduce the output for greater output valve clipping and saturation at lower volume levels. The Rockerverb 50 MKIII features a ‘half power’ mode which drops the plate voltage on the output valves, reducing the output power to 25 Watts.

Valve Buffered FX Loop

For the purist who loves their pedals, our highly transparent effects loop is buffered by a single ECC81/12AT7, ensuring an all-valve signal path from input to output.

• Features a ‘half power’ mode
• Immensely flexible amps
• Features footswitchable attenuator control
• Switchable output power
• Brighter and easily controllable
• Driven by an ECC83/12AT7 valve and a custom transformer
• Orange Amps Rockerverb 50 MKIII Tube Guitar Amp Head

Pig Hog Speaker Cable, 3ft (14 Gauge Wire)

The Pig Hog Speaker Cable is precisely overbuilt to stand up to the most grueling tour conditions imaginable and is designed to provide the highest quality performance with outstanding value. It uses an extra-thick, yet supple 8mm jacket that resists kinking or tangling. Proprietary conductor technology and robust shielding are designed to ensure your sound is crystal clear, without noise or interference, every time. Each cable is hand-tested before shipment.

• High-performance speaker cable
• 9.2mm high-quality PVC outer covering
• 14 gauge wire
• Heat shrink protected 1/4-inch connectors
• Pig Hog Speaker Cable (3-Feet, 14 Gauge Wire)

Pig Hog Black Woven Right Angle Instrument Cable (10-Feet)

The Pig Hog Black Woven Right Angle Instrument Cable is precisely overbuilt to stand up to the most grueling tour conditions imaginable, in a plethora of styles and colors that will give your equipment a unique and vivid voice. The cable is designed to provide the highest quality performance with outstanding value. Pig Hog understands your cables need to sound great and perform reliably, night after night, without costing you an arm or a leg. That’s why they use a high-quality 7mm woven jacket that won’t fray and resists kinking and tangling. The proprietary OFC conductor technology and robust shielding are designed to ensure your sound is crystal clear, without noise or interference, every time. Each cable is hand tested before shipment so you can be sure your Pig Hog Cables will be an integral part of your equipment for years to come.

• High-performance instrument cable
• Unique, high-quality, woven outer covering
• Gold plated 1/4 to 1/4 inch right angle connectors
• Overbuilt to stand up to the most grueling tour conditions
• Designed to provide the highest quality performance
• 7mm woven jacket prevents fraying
• Resists kinking and tangling
• OFC conductor technology
• Hand-tested before shipment
• Ensures your sound is clear without noise or interference
• Pig Hog Black Woven Right Angle Instrument Cable (10-Feet)
• Limited Lifetime Warranty

AQ/